The glass processing center is a professional glass deep processing equipment. To ensure its normal operation and service life, regular maintenance is required.

The maintenance methods of the glass processing center mainly include the following aspects:

Cleaning equipment: Regularly clean the surface of the equipment, remove dust and impurities, clean the guide rails and sliders, replace the air filter, and keep the equipment clean and lubricated.

Lubricating equipment: Regularly replace lubricating oil, clean the oil tank and pipeline, check the oil level of the oil cup, dredge the oil circuit, and ensure the lubrication effect of the equipment.

Cooling equipment: Regularly replace the coolant, clean the filter, check the coolant level and temperature, prevent coolant leakage or insufficient, and ensure the normal cooling of the equipment.

Fastening equipment: Regularly check the tightness of all screws and bolts, tighten all loose screws and bolts, measure the torque of each component, and ensure the stability and safety of the equipment.

Inspecting equipment: Regularly check the connection of all electrical components, record the parameters of each component, replace all fuses and circuit breakers, and deal with abnormal conditions in time to ensure the normal operation of the equipment.

Adjust equipment: regularly adjust the position of the worktable and spindle, measure the radial runout and verticality of the worktable and spindle, detect all tool compensation parameters, compensate for all changes caused by tool wear, and ensure the working accuracy of the equipment.